Gama Force Multicolor

Quick-swap set for frequent colour changes

Mobile, tidy and easy to run. Clear panel, routed lines and quick connectors give you a short, clean routine from one colour to the next—without cluttering the booth.

Colour change, simplified
  • Quick connectors with labelled lines.
  • Short purge routine to limit cross-contamination.
  • Tool-less tip swap (flat / deflector / conical).

 

What it’s for

Job shops and manual cells running short series or multi-colour days where clean swaps and a tidy workspace matter.

TECHNICAL SPECIFICATIONS

DesignationValue
Dimensions (cart)
Height1240 mm (48.8 in)
Width490 mm (19.3 in)
Overall length655 mm (25.8 in)
Electrical
Input voltage220 V / 50 Hz
Power34 W
TypeEN 50050-2
Protection classIP64
Pneumatic
Air input (supply)5–6 bar
Input hose inner diameter8 mm
Air consumption300 L/min (≈ 18 Nm³/h)
Air qualityOil ≤ 0.1 ppm • Humidity ≤ 1.3 g/m³
Spray gun
Weight (without electrode)480 g
Length (without electrode)350 mm
Frequency18–30 kHz
Output voltage (max.)100 kV
PolarityNegative
Output current (max.)120 µA
Typical powder usage5–30 kg/h

Tip: swipe horizontally to view the full table on mobile.

What’s inside the Gama Force 50L

  • Force Master control unit — daylight-readable display, protected gauges and positive-feel knobs with lockable presets for repeatable jobs.
  • Hose parking & lid clips — defined spots for lines and tools so the booth stays organised.
  • P2-1 manual gun — light in the hand with interchangeable tips (flat / deflector / conical) for edges, recesses and broad faces.
  • PE2 injector — stable powder feed and straight routing from hopper to gun for a clean, predictable flow.
  • Dual air regulation — regulator with filter + secondary regulator with manometer; front-access checks keep the routine simple.
  • Clean routing & console — labelled ports, tidy hose/cable management and a sensible console layout that keeps the booth organised.
  • Mobility package — large rear wheels, guided front support and a solid carry handle; low centre of gravity for steady moves over thresholds.
  • Integration-ready — main air intake jack (male) and standard fittings so you can connect to existing booth utilities without adapters.
  • Start-up & service kit — pickup assembly, filters and seals you can swap in minutes; documented cleaning points for fast turnarounds.

Connections & lines (ready to plug)

  • Main air intake — female jack with a 6–8 PU red intake line (0.7 m) to the regulator panel.
  • Injector carrier air — two routed circuits: 6–8 PU red (2 m) and 4–6 PU red (2 m) for clean, predictable feed.
  • Powder hose to gun11–15 antistatic hose (5 m) for reach inside the booth and steady flow.
  • Atomizing air to gun2–4 PU transparent hose (5 m) so checks are visible at a glance.
  • Tank “boiling” air4–6 PU transparent hose (2 m) positioned for quick inspection and cleaning.
  • Power cable — 5 m with strain relief for tidy routing along the frame.
  • Gun cable — 5 m, reinforced connector and guided entry at the control unit.

Light in hand, built for long shifts

The P2.1 gun balances a slim body with a positive-feel trigger and a secure front grip, so passes stay steady even on awkward parts. Nozzles swap without tools and both hose entries are clearly routed, making cleaning and checks a two-minute job.

Reinforced cable entry and a robust socket adaptor protect connections over time, while the rear conductive grip and labelled ports keep training simple and service fast. It’s a gun your operators will reach for every day.

Talk to an Expert

Tell us about your parts (photos + sizes), colour list and daily throughput. We’ll sketch the station, pick the trolley or powder-centre format and list the accessories that keep the booth tidy and service-friendly.

You’ll receive a one-page plan: configuration, footprint & utilities, bill of materials with clear pricing, lead time and training. If needed, we include layout variants for tight spaces or future expansion.

Our systems are made with superior materials and the latest technology, so you can trust that they will last for many years to come. Contact us today to learn more about our system selection and how we can help enhance your operations.

Request offer